Step 1: Preparing the Base
- Lay out the base panel on a flat surface.
- Insert dowels into the pre-drilled holes as shown in the image.
Step 2: Attaching the Drawer Slides
- Place the drawer side panel with the pre-drilled holes facing up.
- Align the drawer slide with the pre-drilled holes and secure it using the provided screws.
Step 3: Attaching the Drawer Slides
- Place the right side panel with the pre-drilled holes facing up.
- Align the drawer slide with the pre-drilled holes and secure it using the provided screws.
- Repeat for the other side.
Step 4: Assembling the Sides to the Base
- Insert dowels into the side panels.
- Attach the side panels to the base panel by aligning the dowels and securing them with screws.
Step 5: Preparing the Allen Key
- Locate the Allen key provided in the assembly kit.
Step 6: Tightening the Screws with Allen Key
- Use the Allen key to tighten all screws, ensuring all joints are secure.
Step 7: Securing the Drawer Slides
- Ensure all drawer slides are securely attached to the side panels.
Step 8: Attaching the Top Panel
- Insert dowels into the top panel.
- Align the top panel with the dowels and secure with screws.
Step 9: Installing the Drawers
- Slide the drawer boxes into the drawer slides attached to the side panels.
- Ensure the drawers move smoothly and are properly aligned.
Step 10: Final Adjustments
- Check all screws and dowels to ensure everything is tight and secure.
- Make any necessary adjustments to ensure the vanity is level and sturdy.
